Lantronix xPrintServer - Office Edition (iOS) Betriebsanweisung PDF herunterladen (Seite 59)

xPrintServer User Guide 59

5: Updating Firmware

The Admin user may use one of two methods to update firmware through the Admin > Firmware

page. Clicking one of the two buttons allows firmware to be uploaded directly from the Lantronix

Web services website or through a USB flash drive.

Figure 5-1 Firmware Update Options

‘

Updating Firmware via the Lantronix Web Services Website

Note: Internet access is required for firmware updates.

This chapter provides directions for updating firmware, which may be necessary from time to

time. Only the Admin user may perform a firmware update through the xPrintServer user

interface.

1. Login to the xPrintServer user interface (see Logging In) as Admin user.

2. Click the Admin tab to access the Admin menu. A list of all available Admin user

configuration options appears to the left of the screen (see Figure 4-10).

3. Click the Firmware link on the left side of the page. The firmware you are currently running

will display.

4. Click the Check for Firmware Update button to check if a firmware update is available at

this time. After a few seconds, you will receive one of two messages:

 “Firmware update is available” indicating you may proceed to step 5.

 “You are running the latest version of the firmware” indicating no firmware update is

necessary at this time.

1 2 ... 54 55 56 57 58 59 60 61 62 63 64 ... 68 69

Keine Kommentare

Lantronix xPrintServer - Office Edition (iOS) Betriebsanweisung Seite 59