Lantronix UDS1100 Betriebsanweisung PDF herunterladen (Seite 15)

3: Getting Started

UDS1100 User Guide 15

Figure 3-2. Standard UDS1100 Connected to Serial Device and Network

To install the unit:

Complete the following steps in order. Refer to the numbers in the figure above.

Note: See the sections that follow for details about connectors and pinouts.

1. Connect a serial device to your unit.

2. Connect an Ethernet cable to the RJ45 port.

3. For the UDS1100-POE version, power is supplied to your unit over the Ethernet

interface using an 802.3af POE-compliant power source such as a POE mid-

span or POE Ethernet switch.

4. For non-POE UDS1100 unit, supply power to your unit using the power supply

that was included in the packaging.

Note: The required input voltage for the non-POE UDS1100 is 9-30 VDC

(center +) or 10-24 VAC (1.5W maximum power required).

5. Supply power to the serial device.

1 2 ... 10 11 12 13 14 15 16 17 18 19 20 ... 83 84

Keine Kommentare

Lantronix UDS1100 Betriebsanweisung Seite 15