Lantronix Ethernet Bedienungsanleitung Seite 59
- Seite / 92
- Inhaltsverzeichnis
- LESEZEICHEN
Bewertet. / 5. Basierend auf Kundenbewertungen
Setup Mode: Channel Configuration
WiBox2100E User Guide 59
If this sequence is not followed, the unit remains in data transfer mode.
7-6. Modem Mode Commands
Modem Mode
Command
Function
ATDTx.x.x.x,pppp or
ATDTx.x.x.x/pppp
Makes a connection to an IP address (x.x.x.x) and a remote port
number (pppp).
ATDTx.x.x.x
Makes a connection to an IP address (x.x.x.x) and the remote port
number defined within the unit.
ATD0.0.0.0
Forces the unit into Monitor Mode if a remote IP address and port
number are defined within the unit.
ATD
Forces the unit into Monitor Mode if a remote IP address and port
number are not defined within the unit.
ATDx.x.x.x
Makes a connection to an IP address (x.x.x.x) and the remote port
number defined within the unit.
ATH Hangs up the connection (Entered as +++ATH ).
ATS0=n
Enables or disables connections from the network going to the serial
port.
n=0 disables the ability to make a connection from the network to
the serial port.
n=1-9 enables the ability to make a connection from the network to
the serial port.
n>1-9 is invalid.
ATEn
Enables or disables character echo and responses.
n=0 disables character echo and responses.
n=1 enables character echo and responses.
ATVn
Enables numeric response or full verbose.
n=0 enables numeric response.
n=1 enables full verbose.
Note: The unit recognizes these AT commands as single commands such as
ATE0 or ATV1; it does not recognize compound commands such as ATE0V.
Send the Escape Sequence (+++) in Modem Mode
Send ‘+++’ in Modem Mode (Y) ? _
Disable or enable the WiBox’s ability to send the escape sequence. The default
setting is Y (Yes) (send the escape sequence).
Auto Increment Source Port
Auto increment source port (N) ? _
Y (Yes) auto increment the source port. The WiBox increments the port number used
with each new connection.
- WiBox2100E User Guide 1
- Copyright and Trademark 2
- Contacts 2
- Contents 3
- 9: Monitor Mode 75 5
- 10: Updating Firmware 77 5
- List of Tables 6
- List of Figures 7
- Purpose and Audience 8
- Chapter Summary 8
- Additional Documentation 9
- Applications 10
- Application Examples 11
- Ad Hoc Network 12
- Protocol Support 13
- Configuration Methods 13
- Addresses and Port Numbers 14
- Serial Connector Pinouts 15
- WBX2100E Network Interface 16
- Ethernet Connector Pinouts 17
- Technical Specifications 18
- Required Information 19
- MAC address 00204A8178A4 20
- Press Enter for Setup Mode 20
- The Server (0) settings 21
- The WLAN (4) settings 21
- Using Device Installer 23
- Quick Start 25
- WiBox2100E User Guide 25 25
- WiBox2100E User Guide 26 26
- Network Configuration 28
- Server Configuration 30
- Hostlist Configuration 32
- Serial Settings 33
- Web-Manager Configuration 34
- WiBox2100E User Guide 34 34
- Channel 34
- Port Settings 34
- WiBox2100E User Guide 35 35
- Pack Control 35
- Connection Settings - TCP 36
- WiBox2100E User Guide 37 37
- WiBox2100E User Guide 38 38
- Endpoint Configuration 38
- Common Options 38
- Connection Settings - UDP 39
- WLAN Configuration 41
- WiBox2100E User Guide 42 42
- Wireless Network Security 42
- Updating Settings 44
- Applying Defaults 44
- Accessing Setup Mode 45
- Exiting Setup Mode 46
- IP Address 47
- Set Gateway IP Address 48
- DHCP Name 49
- Channel 1 (Option 1) 50
- Baudrate 50
- I/F (Interface) Mode 51
- Port Number 52
- Connect Mode 52
- WiBox2100E User Guide 53 53
- WiBox2100E User Guide 54 54
- WiBox2100E User Guide 55 55
- Auto Increment Source Port 59
- Remote IP Address 60
- Remote Port 60
- DisConnMode 60
- Packing Interval 62
- Trailing Characters 62
- Send Characters 62
- Telnet Terminal Type 63
- Channel (Port) Password 63
- WLAN Settings 63
- Network Name (SSID) 64
- Adhoc Network Channel 64
- Security 64
- Fixed or Automatic Data Rate 65
- Transmission Data Rate 65
- Enable Power Management 66
- Expert Settings (Option 5) 67
- Security Settings 69
- Disable Port 77FEh (N) ? _ 70
- Disable Web Server (N) ? _ 70
- Disable Web Setup (N) ? _ 70
- Disable ECHO ports (Y) ? _ 70
- Figure 8-2. Encryption Keys 71
- Default Settings 72
- Expert Settings 73
- Exit Configuration Mode 74
- Monitor Mode Commands 75
- Obtaining Firmware 77
- Reloading Firmware 77
- Network Upgrade 78
- DeviceInstaller 78
- WLAN Country Setting 79
- Method 1 80
- Method 2 80
- Method 3 81
- Problems and Error Messages 82
- Diagnostic LED States 82
- Troubleshooting 83
- WiBox2100E User Guide 83 83
- Technical Support 85
- Conversion Table 86
- Scientific Calculator 86
- Compliance Information 88
- Regulatory Information 89
Verwandte Produkte und Handbücher für Hardware Lantronix Ethernet
Hardware Lantronix XPort AR Bedienungsanleitung
(142 Seiten)
(142 Seiten)
Hardware Lantronix XPort Bedienungsanleitung
(87 Seiten)
(87 Seiten)
Hardware Lantronix TS-DDH Bedienungsanleitung
(20 Seiten)
(20 Seiten)
Hardware Lantronix UDS2100 Bedienungsanleitung
(83 Seiten)
(83 Seiten)
Hardware Lantronix UBOX 2100 Bedienungsanleitung
(79 Seiten)
(79 Seiten)
© 2020, manymanuals.de. Alle Rechte vorbehalten. | 0.056 s |
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Kommentare zu diesen Handbüchern