Lantronix Computer Hardware 900-581 Bedienungsanleitung PDF herunterladen (Seite 123)

5: Commands and Levels

protocol ssl

Uses SSL protocol for connect mode tunneling.

protocol tcp

Uses TCP protocol for connect mode tunneling.

protocol tcp aes

Uses TCP protocol with AES encryption for connect mode tunnel-

ing.

protocol telnet

Uses Telnet protocol (with IAC) for connect mode tunneling.

protocol udp

Uses UDP protocol for connect mode tunneling.

protocol udp aes

Uses UDP protocol with AES encryption for connect mode tunnel-

ing.

show

Shows the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

show statistics

show connection statistics

ssh username <text>

Sets the SSH user name for use when establishing tunneling

connections

with other devices.

<text> = SSH user name.

tcp keep alive <milliseconds>

Enables TCP keep alive for connect mode tunneling and sets the

timer.

<milliseconds> = timer value, in milliseconds.

validate certificate disable

Skips verification of the server certificate when connecting.

validate certificate enable

Requires verification of the server certificate when connecting.

vip disable

Makes connections using the specified Address.

vip enable

Makes connections using the VIP name.

vip name <text>

Sets the VIP name.

write

Stores the current configuration in permanent memory.

host 14 (config-host:14) level commands

clrscrn

Clears the screen.

default protocol

Restores the default value of the protocol (Telnet).

default remote port

Sets the remote port (used to connect to the host) to the default

value,

which depends on the selected protocol.

exit

Exits to the configuration level.

host <number>

Change to config host level

name <text>

Sets the name of the host.

<text> = name of the host.

no name

Clears the name of the host.

no remote address

Clears the remote address of the host.

no ssh username

Clears the SSH username associated with the host.

protocol ssh

Sets the protocol to SSH.

protocol telnet

Sets the protocol to Telnet.

remote address <text>

Sets the IP address of the remote host to connect to when this

host is

selected on the login connect menu.

<text> = IP address.

remote port <number>

Sets the remote port used to connect to the host.

<number> = port to be used.

show

Displays the current configuration.

show history

Displays the last 20 commands entered during the current CLI

session.

PremierWave EN Command Reference 123

1 2 ... 118 119 120 121 122 123 124 125 126 127 128 ... 211 212

Kommentare zu diesen Handbüchern

Keine Kommentare

Lantronix Computer Hardware 900-581 Bedienungsanleitung Seite 123

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Vernetzung Lantronix Computer Hardware 900-581