Lantronix EDS1100 Betriebsanweisung PDF herunterladen (Seite 58)

8: Line and Tunnel Settings

EDS1100/2100 User Guide 57

Host Click <None> in the Host field to configure the Host parameters and enter the

following fields:

 VIP—Enabling the VIP directs the tunnel to connect to a remote

Lantronix Virtual IP identified by the VIP Name. When VIP is enabled,

the Host 2 field displays. See

12: VIP for more information. Default is

Disabled.

Note: The EDS1100/2100 supports configuration of up to sixteen hosts.

 VIP Name—Displays configured VIP name, used only if VIP is enabled.

 Port—Displays configured Port.

 Protocol—Select the protocol type (SSH, SSL, TCP, TCP AES, Telnet,

UDP, and UDP AES) for use with Connect Mode. The default protocol is

TCP. The following are enabled for SSH, TCP, TCP AES, and UDP

AES:

- SSH Username—Displays configured username, used only if SSH

protocol is selected. This is required. The EDS1100/2100 is the

client and the SSH client username must be configured on the

remote SSH server before using the EDS1100/2100.

- TCP Keep Alive—Sends probes to the other end of the

connection to ensure that the connection is still valid. Default is

45000 milliseconds.

- AES Encrypt/Decrypt Key—Displays presence of key, used only

if protocol with AES is selected. When setting AES encryption,

both the encrypt key and the decrypt key must be specified. The

encrypt key is used for data sent out. The decrypt key is used for

receiving data. Both of the keys may be set to the same value.

Note: For UDP, the EDS1100/2100 accepts packets from any device on

the network. It send packets to the last device that sent it packets.

Table 8-17 Tunnel Connect Mode Fields (continued)

Field Description

1 2 ... 53 54 55 56 57 58 59 60 61 62 63 ... 156 157

Keine Kommentare

Lantronix EDS1100 Betriebsanweisung Seite 58