Lantronix SCS1620 Betriebsanweisung PDF herunterladen (Seite 64)

SCSxx05/SCSxx20 User Guide 4: Configuration

4-6

Device Port Configuration Options

You can configure the device ports for port identity (apply a relevant name) and

for feature access and buffer logging. You can configure device ports (for

departments, for identifying equipment types, or for any other reason) in any

combination; groups can be any individual port number, any range of numbers,

or a combination of both. Device ports remain unique; the groups are not used

for access, but merely to assist in your setup of the device ports.

 Device Port Names (change or accept defaults)

 Device Port Parameters (by port or group of ports)

 Device Logging Parameters (by port or group of ports)

 Done Device Ports (writes the device port parameters to flash when

executed)

Device Port Menu

1. Select Configure Device Ports on the setup menu. The system may take a

few seconds to show an intermediate screen and then continue to the Device

Port menu with Device Port Names selected.

2. Continue with Device Port Names, or select one of the other options from

the menu.

Figure 4-4. Configure Device Ports Menu

Device Port Names

The Device Port Names option allows you to assign a meaningful name to each

device port. Default values are DEVICE_01 through DEVICE_48 (for the

SCS4805). You can rename each port individually to have a server name, a

description, or other relevant naming convention.

1. To administer port names, select Device Port Names and press Enter.

2. Enter a port number, and press Enter. You have two options. You can

choose to name the device port or select Done to exit this option.

3. To name the device port, select Set the Name of a Device Port and press

Enter. The existing information for that device port displays. The preset port

names are DEVICE_01 through DEVICE_48 (in SCS4805).

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 140 141

Keine Kommentare

Lantronix SCS1620 Betriebsanweisung Seite 64