Lantronix SCS1620 Betriebsanweisung PDF herunterladen (Seite 66)

SCSxx05/SCSxx20 User Guide 4: Configuration

4-8

3. In the Answer field, enter the number, range, or combination of ports to be

administered.

What device port do you want to configure?

Input a device number, a device name, or a range.

Examples of ranges:

3,7,9

2-12

1,4,6-9,14

Valid port range is 1-48

What device port do you want to configure?

Answer: 1-3,5,7-9,26

4. Press Enter. The enable operator port prompt displays. This option allows

PPP as well as terminal logins through an external modem.

Note: If you connect a modem, make sure to set the port type to

DTE.

Enable Port 3,7,9 as an operator port?

Do you want to enable system logins on Port 3,7,9?

A modem may be connected to this port and PPP will be

supported as well as TTT logins. If you connect a modem to

this port, make sure the port type is set to DTE.

Enable Port 3,7,9 as an operator port?

Yes / No

5. Select Yes to enable system logins, or No (default) to disable system logins,

and press Enter. The operator port baud rate displays if you enabled an

operator port or group of ports; otherwise the baud rate prompt displays.

Operator Port Baud Rate

You can select from seven device baud rates: 2400, 4800, 9600, 19200, 38400,

57600 and 115,200. The default is 115,200.

1. Use the arrow keys to select the baud rate for the operator port(s) from the

list displayed.

2. Press Enter. The baud rate prompt displays.

Baud Rate

You can select from seven device baud rates: 2400, 4800, 9600, 19200, 38400,

57600 and 115,200. Most devices use 9600 as the terminal/administration port's

baud rate, so the device port defaults to this value. Check the equipment settings

and documentation for the proper baud rate.

1. Use the arrow keys to select the baud rate for the port(s) from the list

displayed.

2. Press Enter. The data bits prompt displays.

1 2 ... 61 62 63 64 65 66 67 68 69 70 71 ... 140 141

Keine Kommentare

Lantronix SCS1620 Betriebsanweisung Seite 66